Page 13
4 Using the Remote Control
3 Installing Your EM1
Master Remote Operations
The master remote has all the features of the end user
remote plus five set up features. These features
include:
CONTRAST -
Contrast has a scale from 0 (lowest
setting) to 16 (highest setting). The factory default is
set at 8. To change the contrast push the CONTRAST
button once. This will display a scale on the bottom
middle of the screen, Use the VOLUME up and down
arrows to select the desired setting.
COLOR -
The color setting has a scale from 0 (lowest
setting) to 16 (highest setting). The factory default
setting is at 8. To change the color push the image
brightness button once. This will display a scale on the
bottom middle of the screen. Use the VOLUME up
and down arrows to select the desired setting.
BRIGHT -
The brightness setting has a scale from 0
(lowest setting) to 16 (highest setting). The factory
default setting is at 8. To change the color push the
BRIGHT button once. This will display a scale on the
bottom middle of the screen. Use the VOLUME
up and down arrows to select the desired setting.
EDIT -
The edit button will allow you to customize your
TV and CATV channel selections. To delete a channel
from one of these modes, select the channel you wish
to delete. Push the EDIT button once, then push the
EDIT button once more to confirm selection.
AUTO PROGRAM -
The auto program feature will
automatically detect signal and select them as view-
able channels in the TV and CATV mode. Pushing
the AUTO PROGRAM button once will bring up the
menu. You can choose between STD, IRC, and HRC
cable format by using the CHANNEL up and down
arrows. Once the format has been established, push
the AUTO PROGRAM button once to confirm.
All manuals and user guides at all-guides.com
