1
Entering Navigation
The Basics
Beep:
Touch screen beep On/Off
Reverse:
Camera On/Off setting.
If no Factory camera equipped, set to Off.
Main Settings
To Enter Navigation Mode, press
and hold Compass located on touch
screen for two seconds.
To enter Installer settings, press and hold
Compass for more than five seconds.
Using Aftermarket Camera
To Exit Navigation Mode, press
Exit Map located on the top of
the screen.
1. From the Main Settings page, press
Keypad and enter “1120” Ok.
Camera:
Set Camera Setting from Factory to
Rosen. This will enable Aftermarket Camera
Input.
Summary of Contents for GM Series 2
Page 2: ......
Page 15: ......
Page 16: ...All rights reserved Copyright 2014 Rosen Electronics LP DB GMSERIES3 QSG Rev A...