Page 3
Rosen Products
Quick Reference
To power on the system:
1 Turn ignition switch to
Run
or
ACC
.
2 Press the release button as shown.
3 Screen will power on automatically.
To watch a DVD:
1 Power on the system.
2 Point the remote at the screen and press the
POWER
button to turn on the DVD player.
3 Press the
Eject
button on DVD player or remote to open
tray.
4 Insert a disc into the DVD and press
Eject
button to close
tray. Playback begins.
To listen over the vehicle speakers:
1 Turn on the vehicle radio and tune it to 88.7 FM.
2 Press
SPEAKER ON/OFF
on the remote until “FM ON”
appears on the screen.
3 If you hear no audio, try tuning the radio to 89.1 FM.
To use another video source:
1 Connect the RCA audio and video outputs of the device to
the Audio and Video RCA Inputs on the front of the DVD
player.
2 Press
MODE
on the remote until the video image appears
on the screen.
To watch broadcast television:
1 Press
POWER
on the remote.
2 Press
MODE
until ”TV Mode” appears on the screen.
3 Press the up and down arrow buttons on the remote to
change channels.
ClearVue 6821 DVD System Owner’s Manual
Page 24
DANGER AN IMPROPERLY LOCATED OR INSTALLED
MONITOR CAN CAUSE DEATH OR SERIOUS BODILY
INJURY
READ THE FOLLOWING INFORMATION
THOROUGHLY BEFORE INSTALLATION
It is unlawful in most jurisdictions for a person to
operate a motor vehicle equipped with a television
monitor located where the operator can directly or
indirectly view it.
In some jurisdictions, television
monitors in motor vehicles may be prohibited or may
require the television monitor to be located behind the
operators seat.
Ensure that you are completely aware of and familiar
with all applicable regulations and restrictions related
to the use of this equipment in a motor vehicle for
your local jurisdiction.
In the event of an accident, passengers can be thrown
against objects in the vehicle.
Ensure that the monitor
location is in a position where it will not be struck by a
passenger in the event of an accident.
ALWAYS
mount the monitor securely using appropriate
hardware to a structural component in the vehicle.
Failure
to properly secure a monitor could result in the
monitor coming loose and endangering the
passengers in the event of an accident.
The
INSTALLER
accepts all responsibility for proper
installation of the monitor.
Rosen Products, LLC, is not
liable for any damages, incidental or otherwise, which
may result from the installation of this product.
Important Safety Notices
Summary of Contents for ClearVue CV6821
Page 1: ......
Page 2: ...Notes...
