27
MODEL SOLU COMP II
SECTION 5.0
PROGRAMMING THE ANALYZER
5.11.2 Procedure: Selecting a Display Screen
1.
Press MENU. The main menu screen appears. Choose Display.
2.
Choose Default Display.
3.
Press
"
or
'
until the desired display appears. Press ENTER. For an
explanation of abbreviations, see Section 5.11.1.
4.
The display returns to the screen in step 2. To return to the main menu,
press MENU. To return to the main display, press MENU followed by EXIT.
Calibrate
Hold
Program
DDiissppllaayy
DDeeffaauulltt DDiissppllaayy
Language
Contrst
5.11.3 Procedure: Choosing a Language
1.
Press MENU. The main menu screen appears. Choose Display.
2.
Choose Language.
3.
Choose English, Français, Español, Deutsch, Italiano, or Portugues.
4.
The display returns to the screen in step 2. To return to the main menu,
press MENU. To return to the main display, press MENU followed by EXIT.
Calibrate
Hold
Program
DDiissppllaayy
Default Display
LLaanngguuaaggee
Contrast
EEnngglliisshh
Français
Español
>>
5.11 SELECTING A DEFAULT SCREEN, LANGUAGE, AND SCREEN CONTRAST
5.11.1 Purpose
This section describes how to do the following:
1.
set a default display screen
The default display screen is the screen shown during normal operation. The Solu Comp II allows the user to
choose from a large number of screens. Which screens are available depends on how the analyzer was con-
figured. The following is an explanation of the abbreviations used in the screens.
In the display:
i.
S means sensor. S1 is sensor 1, and S2 is sensor 2. If neither S1 nor S2 appears, then the analyzer has
been configured for a single sensor input.
ii.
G is glass electrode impedance, and R is reference electrode impedance.
2.
select a language
3.
change the screen contrast
To choose a menu item, move the cursor to the item and press ENTER.
To store a number or setting, press ENTER.
