Rosemount 8732 Series, Reference Manual

Page: 173 / 190

Reference Manual
00809-0100-4663, Rev BA
January 2010
Rosemount 8732
www.rosemount.com
Appendix G Transducer Block
Parameters and Descriptions . . . . . . . . . . . . . . . . . . . . . . page G-2
Flow-Specific Block Configuration Values . . . . . . . . . . . . page G-3
Transducer Block Errors . . . . . . . . . . . . . . . . . . . . . . . . . . page G-4
Transducer Block Diagnostics . . . . . . . . . . . . . . . . . . . . . page G-5
Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page G-5
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page G-6
This appendix contains information on the transducer block for the
Rosemount 8732 Magnetic Flowmeter Transmitter (see Figure G-1).
Descriptions of all transducer block parameters, errors, and diagnostics are
listed. Also, the modes, alarm detection, status handling, application
information, and troubleshooting are discussed.
Figure G-1. Transducer
Block Diagram
Definition
The transducer block contains the actual flow measurement data. This data
includes information about sensor type, engineering units, digital filter
settings, damping, and diagnostics. Only a single channel is defined in the
Rosemount 8732. Channel 1 provides flow measurements to the analog input
(AI) block.
Diagnostics
A/D Signal
Conversion
Flow
Da
m
p
in
g
Un
it
s/ R
a
ng
ing
Diagnostics
A/D Signal
Conversion
Flow
Da
m
p
in
g
Un
it
s/ R
a
ng
ing
TB