manualshive.com logo in svg

Rosemount 1495, Installation & Operation Manual

Share
Download
Rosemount 1495 Installation & Operation Manual Download Page 29

Reference Manual 

00809-0100-4792, Rev CA
August 2010

4-3

Rosemount 1495, 1496

Step 4: Install the Orifice 

Plate

General installation instructions to install (or remove) the orifice plate are as 
follows:

1.

Make certain the pipeline is not under pressure and has been drained 
or purged.

2.

Loosen all studs and nuts.

3.

Remove the studs in one half of the flange union.

4.

Spread flange union by turning jackscrews clockwise.

5.

Install new plate or remove existing plate for replacement or 
inspection.

6.

Install new gaskets when installing plate. It is recommended to install 
new gaskets each time orifice flange union is separated.

7.

Release the flange union by turning Jackscrews counter clockwise.

8.

Replace studs.

9.

Tighten studs in a star pattern. See “Bolt Torque Recommendations” 
on page B-12.

NOTE

Refer to published standards (AGA3, ASME MFC-3M, ISO 5167 for 
installation guidelines.

Once the orifice plate is installed, proceed by installing connection systems, 
manifolds, and/or transmitters per manufacturer’s recommended 
specifications and plant standards.

NOTE

Universal style orifice plates are designed for installation into junior or senior 
orifice fittings as well as into RTJ Plate Holders.

Personal hazard! To prevent injury, remove pressure and drain pipe assembly before 
installing or removing orifice plate.

If the process fluid is caustic or otherwise hazardous, the procedure outlined here must be 
modified as required to prevent death or serious injury to personnel.

Summary of Contents for 1495







































































Reviews:

No comments

Brands by name

Popular brands

Load more brands