Rosemor T20 Operation And Maintenance Manual Download Page 3

31/3/2022

Written and illustrated by Ben Sprules 

Rosemor International Ltd 2022 ©

3

Rosemor International Ltd reserves the right to adjust the machine and any documentation.  This 
operation and maintenance instruction manual is intended for service personnel only.

Preliminary remarks

Safety and reliability are essential to guarantee a long and trouble-free service life of the Rotomatic. 
In order to fulfil these requirements, the operator must obtain sufficient skills in both handling and 
operating the machine and of its maintenance and care. It is therefore vital that the operator 
receives instruction and training from either Rosemor International Ltd or one of its specialists 
before the cleaning machine is used for the first time.  

This operation and maintenance manual only represent additional assistance for the operator in 
correct and safe use of the cleaning machine. Reading this manual does not qualify any person for 
safe use of the Rotomatic. 

Rosemor International Ltd or one of its customer service centres should be informed immediately if 
any technical fault in this cleaning machine is suspected or has occurred.

Summary of Contents for T20

















Reviews: