18
Rose Point Navigation Systems
The output is set up for the user using default port outputs. The default output
sentences/PGNs will be listed upon selecting Auto. These defaults can also be
found on the Nemo Gateway support page at www.rosepoint.com
Manual
Mode
The user can set up the output as needed by using this mode. By selecting Edit
next to Generate Sentences, followed by selecting "Add a Generated
PGN/Sentence," the user can specify the type, source, ID, and rate of the data
being output.
Disabled
The Nemo Gateway will not generate any data for this port. (However, if
configured, Coastal Explorer and Rose Point ECS can still output information
through these Talker Ports)
For more information about generating data, please refer to the Nemo Gateway
configuration guide found on rosepoint.com
