12
UltraVista LC Installation and Operations Manual
To navigate within the OSD system, first press the menu button on the front
panel. The Mask Control window will display. Use the up or down arrow
buttons to select (Highlight) an item (MASK, X, OR Y). Once selected, use
the left or right arrow buttons to change the item value. When the correct
values are set, press the Enter button to save the new values.
With no item within the Mask Control window or any other displayed menu
selected (No item Highlighted) pressing the left or right arrow buttons will
advance to the next or previous menu window.
Example: Pressing the Menu button displays the Mask Control window.
With no item selected, pressing the right arrow button will display the Link
Control window, press the right arrow button again and the Slave Mask
Setting window will display.
Following are examples and descriptions of each menu item.
Mask Control
The mask control menu compensates for the gaps between the monitors.
Selection Description
MASK
Toggles the Mask function ON or OFF
X
Adjusts left to right gap compensation
(See Figure 4 for calculating X)
Y
Adjusts top to bottom gap
compensation
(See Figure 4 for calculating Y)
Link Control
Link control enables (ON) or disables (OFF) the
master unit to automatically adjust the mask
settings of the attached slave units.
Scan setting detects the attached slave units
