Package contents
RackView Drawer assembly
Trackball driver (on floppy diskette)
Video monitor users manual (Not included with model RV1-KM)
Power cord (US only)
Rack mounting cage nuts
Unpacking
DO NOT DISCARD THE SHIPPING CONTAINER, PACKING MATERIAL OR SHIPPING PLATE.
Tools needed - #2 Phillips head screwdriver
Remove RackView assembly from the shipping container by removing the top protective foam and lifting
from the middle of the unit.
Remove other protective foam and covering.
Set the unit on a flat surface and open the monitor far enough to remove the protective foam material, and
then close the monitor.
Remove the shipping plate from the back of the unit’s rail assembly (if applicable).
Things to note
This installation guide covers the installation of the RackView models. If the RackView is ordered with the
Rose KVM switch option, please refer to the switch’s manual for cable connectivity and switch
configuration.
Do not adjust the front rail brackets.
The rack dimensions must be 19” x 23” to 28”
It is recommended that two people perform the installation.
Specifications
Monitor
Panel
15”, 17”, or 19” TFT/LCD active matrix color
Max. Resolution
15” – 1024 x 768 @ 75Hz
17” – 1280 x 1024 @ 75Hz
19” – 1280 x 1024 @ 75Hz
Video compatibility
SVGA, VGA, XGA, RGB
Regulations
UL, Energy Star, VESA DPMS
Connectors
15” & 17” models - HD15
19” model – HD15, RCA, S-Video (With PIP)
Keyboard
Selectable
PS/2 or AT
Power
+5V DC/300mA max.
Connector
MiniDin-6
Trackball mouse
Compatibility
PS/2 (MiniDIN-6) or serial (DB9)
Resolution
Variable 20-6400 dpi
Tracking speed
500 mm/sec
Connector
MiniDin-6
RackView
Temp/Humidity
32°F - 104°F / 0°C - 40°C, 5% - 80% RH