INSTALLATION and OPERATION
Vista HDMI 4K KVM Switch Manual
3
Installing the Vista HDMI 4K Switch
Unpack the Vista HDMI 4K switch and check the contents of the package.
If the switch is to be rackmounted, then attach a rackmount bracket (not included) to either side of the switch
using the provided screw-set.
Before installing the switch into the rack, connect two PC’s using the included HDMI/USB/Audio cables, and
then connect a monitor, keyboard and mouse to the user port.
Power on the monitor, then the switch, followed by the PC’s. Check to confirm the PC’s can be switched (via
front panel or keyboard hotkey) and that full operation of the switch is confirmed.
Once this operation has been confirmed, the switch can then be fully installed into the rack. Connect the
remainder of the HDMI/USB/Audio cables to the Vista HDMI 4K switch
Vista HDMI 4K – Cabling schematic
Figure 1. Vista HDMI 4K cabling layout diagram
