INTRODUCTION
Vista HDMI 4K KVM Switch Manual
1
Disclaimer
While every precaution has been taken in the preparation of this manual, the manufacturer assumes no
responsibility for errors or omissions. Neither does the manufacturer assume any liability for damages resulting
from the use of the information contained herein. The manufacturer reserves the right to change the
specifications, functions, circuitry of the product, and manual content at any time without notice.
The manufacturer cannot accept liability for damages due to misuse of the product or other circumstances
outside the manufacturer’s control. The manufacturer will not be responsible for any loss, damage, or injury
arising directly or indirectly from the use of this product (See limited warranty).
System Introduction
Thank you for choosing the Rose Electronics Vista HDMI 4K KVM Switch. The Vista HDMI 4K is a 2K/4K,
HDMI/USB/Audio Switch with USB2.0 sharing. The switch provides access and control to four 4K Ultra HD
computers, using a USB keyboard/mouse and HDMI monitor.
Video resolutions supported include 1080p, 1080 3D and 3480x2160@30Hz (4K/30).
USB2.0 devices can be connected to the switch and shared between the 4 connected workstations. Digital
audio output is supported.
The instructions in this manual assume a general knowledge of computer installation procedures, familiarity
with cabling requirements, and some familiarity with HDMI and USB device operation.
Features
■
Supports 1080p, 1080p 3D and 4K Ultra-HD, 36-bit color (3840×2160) @30Hz
■
HDMI 1.4 (with audio) and HDCP compliant.
■
Fully supported with Mac, PC, Linux, Sun Mac OS, Sun OS and Unix
■
Supports USB2.0 devices, and USB-HID keyboard/mouse
■
HDMI audio support, LPCM7.1, Dolby True HD, Dolby Digital Plus and DTS-HD Master Audio
■
Access and control the switch via front panel (2 x 20) LCD and push buttons, keyboard hot-keys, RS-232
serial or optional TCP/IP (using TCP/IP over serial)
■
Serial control interface via the DB9 serial port using the Rose RCS-4RS/D9 4-port remote control switch
■
EDID learning and programming for all ports
■
Zero-pixel loss with TMDS signal correction
■
Independent switching and operation of the KVM station and USB2.0 ports
■
Complete keyboard emulation for error free booting of connected PC’s and servers
