Parts
35 Congress Street, Salem, MA 01970
Tel# 1- 800 631-9707 Fax# 1-800-560-2890
e-mail:[email protected]
Step 6
Attach frames to corner spines. Be sure
to insert bottom rib of corner brace into
bottom channel of the AnoFrame rail,
as shown in
Fig. 6.
Repeat for all frames.
Fig. 7.
Step 7
Attach one corner brace onto the top
of each corner spine rail.
Fig. 8.
Step 8
If using the cable and loop for hanging,
insert loop into hanger tab. If using the
cable and saucer for hanging, insert saucer
into hanger tab.
Fig. 9.
Step 9
Insert one screw into each hanger tab
and align with hole in top corner brace.
Fig. 10.
Step 10
Screw hanger tab into place.
Fig. 11.
Instructions for assembly
Incept-1.24.03
The AnoSkybox™ is a trademark of Rose Displays, Ltd. Neither the
manufacturer nor any sales agent may be held liable for injury, loss or
damage resulting from the use of these products.
Part #03INSSideLoadingAnoSkyBox
Figure 8
Figure 6
Figure 7
Figure 11
Figure 10
8 Corner
Braces
4 Spine Rails
1 Ball Head
Screwdriver
8 Screws
4 Hanger Tabs
Figure 9
Side-Loading AnoSkyBox
TM
Instruction Sheet