Parts
split
rails
solid rail
solid rail
split rails
8 Corner
Braces
4 Spine Rails
35 Congress Street, Salem, MA 01970
Tel# 1- 800 631-9707 Fax# 1-800-560-2890
e-mail:[email protected]
Step 3
Attach one corner brace onto one end of
each corner spine.
Fig. 3.
Step 4
Screw into place and tighten.
Fig. 4.
Step 5
Lay out AnoSkyBox parts as shown.
Be sure to lay out frames so each corner
contains matching frame sides — two
corners should contain only split rails and
two corners should contain only solid rails.
Fig. 5.
Note: Once side of each frame contains
split rails. When laying out your
AnoSkybox, make sure you match the
split rail sides of both frames to the same
corner spine. You should have only 2
corners containing split rails.
Instructions for assembly
Incept-1.24.03
The AnoSkybox™ is a trademark of Rose Displays, Ltd. Neither the
manufacturer nor any sales agent may be held liable for injury, loss or
damage resulting from the use of these products.
Part #03INSSideLoadingAnoSkyBox
Figure 5
Figure 3
Figure 4
1 Ball Head
Screwdriver
8 Screws
4 Hanger Tabs
Side-Loading AnoSkyBox
TM
Instruction Sheet