The Gotcha
®
is a registered trademark of Rose Displays, Ltd. Neither the
manufacturer nor any sales agent may be held liable for injury, loss or
damage resulting from the use of these products.
Part #02INSGotcha withAdhesive
Parts
Installation Instructions
Instruction Sheet
Step 1
Clean surface first. Be sure the surface that you
are applying the Gotcha with Adhesive to is dry
and free of dust.
Step 2
Place poster on a flat surface. Snap the Gotcha
open and insert poster. To close, snap the Gotcha
shut
(Fig. 1)
.
Note: It is easier to open and close the
Gotcha by starting at one end and working your way
down the holder.
Step 3
Peel paper backing off of adhesive
(Fig. 2)
.
Step 4
Properly align Gotcha with Adhesive
before
applying pressure. This procedure is very impor-
tant.
Step 5
To affix Gotcha with Adhesive, apply steady, firm
pressure for 15-30 seconds. Please allow adhe-
sive to cure for 30 minutes before changing
graphics.
Gotcha with Adhesive
Gotcha with Adhesive
Rev. 7.31.02
Figure 1
Figure 2
➤
Peel paper
backing off
adhesive strip
35 Congress Street, Salem MA 01970
Tel# 1-800-631-9707 Fax# 1-800-560-2890
e-mail:[email protected]
