2-18
Hardware Setup
▍
J
uMper
Clear CMoS Jumper: JBAT1
There is a CMOS RAM onboard that has a power supply from an external
battery to keep the data of system configuration. With the CMOS RAM,
the system can automatically boot OS every time it is turned on. If you
want to clear the system configuration, set the jumper to clear data.
Important
You can clear CMOS by shorting 1-2 pin while the system is off. Then
return to 2-3 pin position. Avoid clearing the CMOS while the system is
on; it will damage the mainboard.
Clear CMOS
Keep CMOS data
JCMoS1
1
1
1
ME Jumper: JME1
This jumper is used to disable/ enable the Intel AMT ME technology.
Disabled
Enabled
JME1
1
1
1
