1-36
Chapter 1: Product introduction
8. USB connectors (10-1 pin USB56, USB 78, USB910)
These connectors are for USB 2.0 ports. Connect the USB module cable to any
of these connectors, then install the module to a slot opening at the back of the
system chassis. These USB connectors comply with USB 2.0 specification that
supports up to 480 Mbps connection speed.
Never connect a 1394 cable to the USB connectors. Doing so will damage the
motherboard!
9. Optical drive audio connector (4-pin CD)
These connectors allow you to receive stereo audio input from sound sources
such as a CD-ROM, TV tuner, or MPEG card.
iQ965-IGM Internal Audio Connector
CD
(black)
Right Audio Channel
Left Audio Channel
Ground
Ground
iQ965-IGM
USB 2.0 connectors
USB56
USB+5V USB_P6-
GND NC
USB+5V USB_P5-
GND
USB78
USB+5V USB_P8
-
USB_P8
+
GND NC
USB+5V USB_P7-
GND
USB910
USB+5V USB_P10-
GND NC
USB+5V USB_P9-
GND
The USB module is purchased separately.
