4
EMB-M4 User`s Manual
Specifications
•
Processor Support:
VIA nanoBGA2 V4 interface CPU mounted on board.
Support VIA C7 High performance CPU 1.5G, 1.6G, 1.8G
and 2.0GHz.
Support VIA EDEN (V4) Low Power CPU 400M, 500M,
600M, 800M, 1.0G, 1.2G, 1.5GHz.
•
Major Chipset:
VIA CN700 and VT8237RPlus chipset.
RealTek RTL8100BL LAN chip.
Winbond 83627HF Super I/O.
ALC655 AC97 Audio chip.
•
System Memory:
One DDR DIMM 184-pins Sockets support DDR
266/333/400 unregistered non-ECC up to 1.0 GB.
•
Video Controller:
CN700 Integrated S3 Graphic Engine.
One 15-Pins D-Sub Female connector for CRT Displays.
One 40-pins 1.25mm pitch connector for Dual 18/24-bits
LVDS LCD displays.
One 40-pins 1.25mm pitch connector for TTL LCD displays.
One 7-pins Mini-DIN connector on rear support S-video and
composite video signals for TV-OUT displays.
One 5-pins JST connector for Inverter power and brightness
control.
•
Super I/O:
Winbond 83627HF LPC I/F Super I/O chip.
Six RS-232 ports as COM1~COM6. COM1 and COM2 are
D-Sub 9-pins male on Rear. COM6 is pin-header (2x5
pin-header/ 2mm pitch) for internal connection. Pin9 is
powered with either 5V or 12V selected by a 3-pins/2mm
Jumper.
COM3~COM6 are pin-header (2x5 pin-header/ 2mm pitch)
for internal connections. Both COM2 and COM4 are
RS232/422/485 selectable by jumpers.
1 x Parallel port supports SPP/ECP/EPP mode. (25-Pins
D-Sub Female on Rear).
Summary of Contents for EMB-M4
