Roroshetta ELEGANT, User Manual

Page: 24 / 28

24
Odour filter (recirculation use)

WARNING!
Depending on type, filter can be or cannot be
regenerated. Refer to the leaflet provided with
the filter. Replace the odour filter when the filter
saturation indication system indicates this
necessity. Carefully remove the filter.
Put the filter back and reset the memory of the
filter saturation indication on the appliance.
13. TROUBLESHOOTING
Symptom Possible cause Solution
The display lights up when the
hob is activated for the first
time. This is the standard set-up
routine. Normal operation.
The fan runs on for several
minutes after the hob has
been switched off. The hob is cooling. Normal operation.
A slight smell is noticeable the
first few times the hob is used. The new appliance is heating
up. This is normal and will
disappear once it has been
used a few times. Ventilate the
kitchen.
The pans make a noise while
cooking. This is caused by the energy
flowing from the hob to the
saucepan. At high levels this is perfectly
normal for some pans. It will not
damage either the pans or the
hob.
You have switched on a cooking
zone, but the display shows
u .
The pan you are using is not
suitable for induction cooking,
or has a to small diameter. Use a suitable pan.
A cooking zone suddenly stops
working and you hear a signal. The time that has been set for
the timer has ended. Touch the left or right timer key
to stop the alarm.
The hob is not working and
nothing appears in the display. There is no power supply due to
a defective cable or a faulty
connection. Check the fuses or the electric
switch (if there is no plug).
A fuse blows as soon as the
hob is switched on. The hob has been wrongly
connected. Contact a professional installer.

WARNING!
If you see a crack in the glass top (however
small), switch off the hob immediately and
disconnect it from the power mains. Contact the
service department.
If the appliance does not work properly, this
does not always mean that it is defective. Try to
deal with the problem yourself first by checking
the table below. You can also take a look on our
website for more information. If the problem
continues, contact the service department.
EN