background image

16

Recall function

If the hob was switched off accidentally with the 
On/off key, all settings can be restored using 
the recall function.
1.  Touch the on/off key again within 5 seconds.

Ÿ

The pause key is flashing.

2.  Touch the pause key within 6 seconds.

Ÿ

The previous settings are active again.

8.9 Using the minute 
minder

The minute minder is not connected to a 
cooking zone. The minute minder does not
switch off a cooking zone.
The hob is switched on and no power level has 
been set for any cooking zone.
1.  Touch the minute minder key to switch on 
the minute minder.

Ÿ

The timer display shows ‘0.00’.

2.  Use the ‘+’ or ‘-’ key to set the desired time 
(from 1 minute to 9 hours and 59 minutes).

Ÿ

The left position of the timer display shows 
the hours, the other positions the minutes.

Ÿ

When the time is set, it will begin to 
countdown.

Ÿ

The timer display will show the remaining 
time.

Ÿ

The last 10 minutes will be displayed in 
minutes and seconds.

Ÿ

The timer flashes and the alarm beeps after 
the set time has passed.

3.  Touch the timer display to stop the alarm.

Ÿ

The alarm stops automatically after 2 
minutes.

Touch the timer display and then touch the ‘-’ 
key to set the time to ‘0.00’ to switch off the 
minute minder before the time has passed.

8.10 Using the cooking 
timer

The cooking timer is connected to a cooking 
zone. After the set time has elapsed, the 
cooking zone will switch off automatically.
The hob is switched on and for at least one 
cooking zone a power level has been set.
1.  Touch the desired cooking zone key.
2.  Touch the timer display.

Ÿ

The timer symbol of the active cooking timer 
lights up brightly.

3.  Use the ‘+’ or ‘-’ key to set the desired time 
(from 1 minute to 9 hours and 59 minutes).

Ÿ

The left position of the timer display shows 
the hours, the other positions the minutes.

Ÿ

When the time is set, it will begin to 
countdown and the timer symbol flashes 
slowly.

Ÿ

The timer display will show the remaining 
time.

Ÿ

The last 10 minutes will be displayed in 
minutes and seconds.

Ÿ

The selected cooking zone will switch off 
automatically once the set time has elapsed.

Ÿ

The timer flashes and the alarm beeps after 
the set time has passed.

4.  Touch the timer display to stop the alarm.

Ÿ

The alarm stops automatically after 4 
minutes.

All the cooking zones can have a cooking timer 
that has been set. The display will always show 
the time of the cooking zone with the shortest 
time remaining.

Changing the pre-set cooking time

The cooking time can be changed anytime 

EN

Summary of Contents for ELEGANT





























Reviews: