Galaxy Raid Installation and Hardware Reference Manual
5-16
Replacing a Failed Hard Drive
Step 3.
Open the front flap
by pushing the button at the front of the drive
tray. (See
Figure 5-22
) The drive tray front flap will automatically
be lifted and the drive tray will be dislodged from the chassis.
Figure 5-22: Opening the Front Flap
Step 4.
Remove the drive tray with the hard drive
, gently and carefully
withdrawing the drive tray with hard drive from the chassis. (See
Figure 5-23
)
Figure 5-23: Removing a Drive Tray
Step 5.
Remove the four (4) retention screws
located on the sides of the
drive tray (two on each side.) (See
Figure 5-24
)
Figure 5-24: Removing the SATA Hard Drive
Step 6.
Remove the hard drive from the drive tray.
Step 7.
Install the new hard drive.
Please refer to the complete hard drive
installation procedures in
Section 2.7.3.
Step 8.
Install the drive tray with the hard drive to the chassis.
See
Section 2.8
.
