© ROPOX 2016
Page 10
6.2 Reinforcement of wall units
3 x Marking
6.2.1 Bottom profile to be hooked onto the
frame.
6.2.2 Mount the bottom profile with the
two screws.
6.3.1 Place wall unit on the floor with the
backside turned upwards, position
VertiElectric on top of the wall unit
in the centre.
6.3.2 Mark 3 holes trough the frame and
gear box, be careful not to damage
any parts of VertiElectric.
6.3 Marking of holes in wall unit
6.3.4 Finally drill all 4 holes (3 x ø12) - (1 x ø30).
6.3.3 Mark one hole in the top of wall unit.
1 x
Marking
3 x ø12mm / 0.5in
1 x ø30mm / 1.2in
