19
TF 200.01.0052_eng
4.4 Wire diagram
The nursing table is supplied with the control box already mounted on the frame. The wire diagram shows
how the cables are connected.
Every plug is waterproof; hence they might be difficult to plug into or dismount from. Make sure the cable is
turned in the correct direction before plugging it into the control box. The cable must be pressed into the
plug, until the O-ring is no longer visible.
The motor cable is connected to input 1 in the control box. Input 2, 3 and 4 is unused, and is mounted with
sealing plugs. The hand control is connected to input
“HB”. The mains cable is connected to the side of the
control box.
4
1
3
5
2
1. Control box
2. Mains cable input, 230V
3. Motor, input 1
4. Hand control
5. Safety stop cable
