12
TF 200.01.0052_eng
4.3.1 Dimensions
4.3.2 Mounting instructions
The holes for fastening can be marked up on the wall, four possibilities in the top, and two in the bottom of
the frame. Place the frame against the wall and make sure it is horizontal. Remove the frame and drill the
holes.
The nursing table is supplied together with a set (8 pcs.) of screws and rawlplugs, which is used to mount the
unit in a concrete wall. The installer must always examine the material, condition and strength of the wall and
use appropriate screws and rawlplugs.
Caution!
Ensure no dust or other obstacles are interfering with the rollers, chain, sprocket, or gas
springs. This can cause malfunction, and damage the system.
Belt
Power
Actuator
Control box
