12
TF 200.01.0041_eng
4.
Instructions for use
4.1 Installation interfaces
All models of Straight and Wave
(40-40110, 40-40115, ..20, ..25, ..40, ..45, ..50, ..51, ..52 and
..53)
CONSTRUCTION
The wall must be made of a material suited for screw
mounting and approved for damp rooms.
The hatched area is the minimum area for reinforcement of
the wall. Reinforcement from floor to ceiling is advisable.
The Toilet Support arms from 40-40110 up to 40-40145 are
all 900mm (35 ½”) long. The models 40-40150 and 40-
40151 are 760mm (30”).
All support arms are load-tested according to DS/ISO
17966 the max user weight is:
Max. user weight according to DS/ISO 17966
40-40110: 190kg
40-40115: 190kg
40-40120: 390kg
40-40125: 390kg
40-40140: 385kg
40-40145: 385kg
40-40150: 255kg
40-40151: 255kg
40-40152: 385kg
40-40153: 390kg
Max. tensile load of upper screws
40-40110: 80kg
40-40115: 80kg
40-40120: 90kg
40-40125: 90kg
40-40140: 160kg
40-40145: 160kg
40-40150: 90kg
40-40151: 90kg
40-40152: 160kg
40-40153: 90kg
NOTE:
All dimensions are based on a fixed height
of the toilet support of 800mm (31 ½”) above floor
level. If a change of this height is required,
the recommended dimensions must be
changed accordingly.
The unit is supplied with a set of 6 screws and rawlplugs
suitable for mounting on a concrete wall. The fitter
should always consider the material, condition and
strength of the wall and use screws and rawlplugs
suitable for the specific wall type.
Straight
40-40110
40-40120
40-40140
40-40150
40-40152
40-40153
Wave
40-40115
40-40125
40-40145
40-40151
