LUBRICATION
The specially compounded lubricants or their equivalent as specified on the data plate furnished with your
machine and the lubrication chart must be used. See Figure 1 for lubrication points.
LUBRICATION CHART
LUBRICANT
COMPONENT
Mobile
Texaco
INTERVAL
BEARING BLOCKS
*MOBILE
40 HRS.
GREASE
*TEXCLAD
SPECIAL
2
DRIVE CHAIN
MONTHLY
* FOR REFERENCE - ANY EQUIVALENT IS ACCEPTABLE
CONNECTING ELECTRICAL SERVICES
1.
WARNING
: Electrical Danger - Misuse or improper installation of machinery connected to a source
of electricity may result in accidental shock that could cause injury or death. Installation must conform
to National Electric Code (Article 250 - Grounding, etc.)
2.
WARNING
: Electrical connections must be made by a qualified electrician. Electrical
characteristics shown on motor plate and control panel must match the power source; and all
electrically powered equipment must be grounded.
3.
CAUTION
: Electricians checking direction of rotation should be cautioned not to operate the
machine until it has been thoroughly checked, cleaned, leveled, and lubricated. For wiring diagram
see Figure 7.
5
