13. Lift the valve and push the hoses back through the access hole, making sure the hoses do not kink
(Figure 12). Position the valve flat against the tiles and line up the fixing holes with those on the metal
installation frame. Secure the valve to the fixing frame.
Note: Tighten fixing screws with a screwdriver to prevent over-tightening. Do not use an electric
driver as this may damage the valve housing.
14. When secured in place, the fixing nuts of the flexible hoses will be visible above the valve housing.
This will allow the connections to be checked for leaks and for the hoses to be tightened slightly, if
necessary, without removing the entire valve.
Figure 12
Figure 13
