R X 2 5 0 0 A S S E M B L Y I N S T R U C T I O N S & M A N U A L
3 2 - 0 0 1 6 R E V .
B
11
Product Assembly - Hipervision enabled RX2500
If the RX2500 was purchased with the Hipervision Bluetooth module please
review the following installation procedure while performing STEP 2 on page 6
Note: Hipervision App is required to establish connection with the Bluetooth
module.
Connections:
•
3.5mm mono male to female connector
•
On some models a USB socket will be installed on the base and a USB
Type- A connector will be routed through the main mast. This connection
is used to power up smart that are mounted permanently on equipment.
Once connected and additional USB Type-A connector can be found
tucked inside the base for connection to external power supply.
Tools:
•
3/16 or 1/4 Hex Key for 5/16” Button Head Screws
•
9/64 Hex key for #8-32 battery cover screws
RX2500 Main Mast
Bluetooth module cover
Sensor cables & connectors
RX2500 Base
