ROOTS RootsScrub E4043, Operator'S Manual

Page: 29 / 40

29 RootsScrub E4043
MAINTENANCE
CLEANING THE SQUEEGEE
=
Move the machine to the designated cleaning area.
=
Remove the squeegee (a) from the machine by loosening the
squeegee holder knobs (b) (2 nos) and washers (c) (2 nos).
=
Detach the suction hose (d) from the squeegee.
=
Remove any debris, thread, rope etc from the squeegee.
=
Clean the squeegee under running water.
=
Remove the squeegee suction port (e) by removing the
suction port holder knobs (2 nos).
=
Remove any debris, thread, rope etc from the suction port.
=
Clean the suction port under running water. Use mild
detergent if required.
a
b
c
d
e
The suc on port is in a bright yellow colour for easy
iden fica on of maintenance components which have to be
removed and cleaned.
WARNING
DO NOT CLEAN THE SQUEEGEE AND ITS COMPONENTS INTO
THE ENVIRONMENT. THERE IS A RISK OF CONTAMINATING THE
ENVIRONMENT.
WARNING
DO NOT USE HARSH CHEMICALS AND ACIDS TO CLEAN.
Suc on Port Knob
Suc on Port
Gasket
A er removal of the suc on port, clean the retaining gasket
under clean running water. Do not use harsh acids or chemicals.
NOTE: ENSURE THAT THE SUCTION PORT GASKET IS
PLACED PROPERLY TO PREVENT VACUUM LEAK.
CLEANING THE SQUEEGEE LIPS
=
Remove the squeegee lip holder using the toggle clamp. Pull
the toggle latch forward to loosen the clamp.
=
Remove both front and back squeegee lip holders.
=
Remove any debris, thread, etc.
=
Remove the squeegee lips and clean them under clean
running water. Use mild detergent.
=
Assemble the lips back after cleaning.
=
Secure the lips using the squeegee lip holder via the toggle
clamp.
Squeegee Lip Holder
Squeegee Lip