7
RootsScrub E 350
Park Position
If not operated, the machine has to be stored in its park
position. This position is attained by using the support
roller located at the front of the machine as represented.
Actuate the support by a lever located above the support
roller (see Fig.) And the brush head of the machine is
lightly lifted. This is to preclude deformation of the
brushes.
Parking Position
Working Position
Transport
For easy transportation of machine, it is recommended to
lift up the brush head and squeegee as represented, prior
to transportation of the machine.
Handling of line cords
Ÿ
Make sure that the line cords are not damaged by
running over, squeezing, dragging , etc.
Ÿ
The line cords must be checked regularly with regard to
damage and aging.
Ÿ
The machine must not be used unless the line cords
are in proper condition.
Ÿ
Use only original extension cables, with maximum
admissible length of 25 m.
Ÿ
When using or replacing line cords, it is necessary to
adhere to as specified by the manufacturer.
Ÿ
When replacing coupler plugs of line cords or
connecting leads, splash-proof protection and
mechanical strength must be guaranteed.
Ÿ
Check the immediate surrounding prior to starting.
Ensure sufficient visibility!
Ÿ
The operator must always use safety gloves, safety
helmet, shoes while operating/maintaining the
machine.
Ÿ
On inclined/tilted surfaces, the tilt angle and the
driving direction should not exceed the values given
in this manual.
Ÿ
Do not place any tools or metallic objects on top the
battery. Risk of short circuit and deflagration!
Ÿ
Smoking or naked flames are strictly prohibited.
Ÿ
Always allow the machine sufficient time to cool
before carrying out any repair or maintenance work.
Ÿ
Ensure that there is adequate ventilation for diverting
the exhaust gases/dust when operating the machine
in a closed area.
Ÿ
Do not place hand or any object while the brushes are
running.
Ÿ
Suitable tools must be used for cleaning and
maintenance work.
Ÿ
Do not carry out any welding, drilling, sawing or
grinding work on the frame sections. Damaged parts
may only be changed at an authorized service center.
Ÿ
It is not permitted to use aggressive and corrosive
cleaning agents.
Ÿ
Used batteries with the recycling symbol must not be
disposed of in household waste.
Ÿ
Maintenance work may be carried out by authorised
dealer only.
Ÿ
Always use appropriate tool and equipments while
working on the machine.
Ÿ
The cable must not chafe against anything. In the
case of defective insulation, do not use the on-board
charger.
This machine is not suitable for evacuation of
dusts, which are explosive or dangerous to
health.
Do not clean the machine by means of
vapour jet or high pressure cleaning
equipment.
Ÿ
Do not use harsh chemicals to clean the machine.
- Do not smoke near machine.
- Do not expose machine to naked flames
or burning debris.
Ÿ
Before operating the machine kindly use these
safety devices:
a) Shoes
b) Gloves
X
GENERAL SAFETY INSTRUCTIONS - WALK BEHIND SCRUBBER DRIERS