ROOTS Jet E 130, Operator'S Manual, Page: 11 / 15

11
Jet E 130 / 170
MACHINE OPERATION
Ÿ
Switch on the machine
Ÿ
Connect the fresh water supply to
the filter.
E n s u r e t h a t t h e i n f e e d w a t e r i s c l e a n .
DO NOT USE HOT WATER
Ensure to bleed the residual air before starting the
machine. Release the safety lock and press the trigger to
bleed the air.
Ÿ
Connect the cable to main power.
Ÿ
The machine should only
be connected to a mains power supply equipped with an
adequate earth connection.
Ÿ
Release the safety lock and pull
the lever.
After the operation hold the safety lock in trigger for
safety.
Ÿ
Adjust the pressure adjustment
knob for your usage
End of cleaning
For Solution
Ÿ
Switch OFF the mains power.
Ÿ
Stop the water supply for filter inlet.
Ÿ
Bleed the residual air from the system by pressing the trigger
for a few seconds.
Ÿ
Mount the gun & hose on its place.
Ÿ
Clean the filter.
Ÿ
Connect the solution tank to the
solution inlet through the hose.
Ÿ
Adjust the solution control knob for
usage.
There is a provision to use detergent for cleaning purpose
Ÿ
For solution applying, just pull the
nozzle forward.