ROOTS E4545, Owner'S Manual, Page: 9 / 20

9
RootsScrub E Series
Owner's personnel are not allowed to unpack
the machine.
After Unpacking
FIRST OPERATION
A squeegee and suitable brushes or pads are required for
wet cleaning of hard floorings. The rotating brush scrubs
the floor thoroughly, removing dirt through suds, thereby
cleaning the floor. The dirty water is drawn during the
same cycle through the squeegee. Thus, the floor can be
walked on immediately after it is dry and clean.
Useful Tips:
Ÿ
Prior to wet cleaning, it is necessary to sweep the
floor.
Ÿ
This way, not only is the cleaning efficiency improved,
but wear of the brush is also substantially reduced.
Ÿ
If floors are particularly dirty or if wax has to be
removed (basic cleaning); the floor must be treated
twice.
Ÿ
During the first cycle, the floor is scrubbed with the
cleaning agent selected according to the degree of
dirt encountered, the squeegee remaining lifted.
Ÿ
Allow the cleaning agent to act on the floor for approx.
5 or 10 minutes, complying with the manufacturer's
instructions.
Ÿ
Scrub the floor once again while the squeegee is
lowered.
Ÿ
Too much foam indicates excessive dosage or
improper suitability of detergent for the existing kind
of dirt.
Ÿ
Detergent particles contained in the soiled water that
are not used will cause formation of foam.
Ÿ
Instructions for dosage are given on the detergent
tank and must ideally adhere to manufacturer's
recommendations.
Ÿ
The ideal type of detergent and the perfect dosage
applicable to it will come through sustained use of the
machine.
Comply with instructions for correct dosage of
detergent. Correct dosage will help optimize
costs and also minimize impact on the
environment. Too much foam can affect the
performance of the machine.
2
3
4
1
1. Fresh water tank
2. Dirty water tank
3. Brush head
a) Disc type
b) Cylindrical type
c) Twin Disc type
4. Squeegee
a) Straight
b) Parabolic
5. Handle
6. Fresh water fill port
7. Control panel
8. Fresh water level indicator
9. Squeegee control handle
10. Pedal for lift/lower brush head
Identification of main parts
Verify the machine and accessories with the invoice
copy. Check the machine for any transit damage, if
found contact the branch/dealer immediately.
3b
3c
4a
4b
450
5
2
6
3a
1
8 10
7
9
Principle of Operation