ROOTS E4545, Owner'S Manual, Page: 12 / 20

12
RootsScrub E Series
Cylindrical Type Brush Twin Disc Type Brush
Installation of brush Installation of brush
Removal of brush
Ÿ
The tank should be empty.
Ÿ
Raise the brush head.
Ÿ
Hold the brush in hand - press while rotating the brush
onto the catch till a click sound.
OPERATION BRUSH
Ÿ
Tilt the debris tray towards machine side and pull it
out.
Ÿ
Now empty the tray by inverting it and shaking.
Ÿ
Clean the tray and place it back for further cleaning.
Debris Cleaning
n o
tio f r
c o e
r t
i a
D tion
When inserting the brushes for the next
operation, make sure to change position of the
brush such that one-sided brush wearing is
preluded.
Ÿ
Remove screw of the brush cover.
Ÿ
Fasten supplied brushes at the drive rollers at the
inside of the opposite cover.
Ÿ
Close brush cover such that the guiding rollers and
the brushes catch safely.
When mounting, check the safe catching
of rollers and brushes.
Before cleaning or maintaining the machine as
well as before replacing parts of it, turn the
machine off and disconnect the plug.
Ÿ
Raise the brush head and set to its parking position.
Remove the screw at the idler end, open the cover
and pull the brushes towards the user.
Ÿ
Close the cover and retighten the screw.
Removal of brush
Ÿ
Empty the tanks.
Ÿ
Lift the squeegee and the brush head.
Ÿ
Rotate the brush with a sudden jerk to remove them.