Chapter 3 Accura 2300[S] Operation/Setup
Accura 2350-TEMPS User Guide
Page 24
ⓒ
2020 Rootech Inc. All Rights Reserved
Setup Mode of Accura 2300[S]
DO Operation Setup for Events of Accura 2350-TEMPS Module
Users can check events of the Accura 2350-TEMPS module by moving to the ETC column with the
Right(>) or Left(<) button in the setup mode of Accura 2300[S] and moving to the DO [Digital Output]
setup screen with the Down(
∨
) button. If
“
M.tMP
”
is selected on the screen as shown below, Accura
2300[S] outputs DO signals when an event occurs in the Accura 2350-TEMPS module. The type of the
output is determined according to DO settings. For details about the setup mode of Accura 2300[S],
refer to
「
Accura 2300[S]/2350 User Guide
」
.
Users can reset the output status in the event log mode by long-pressing the EVENT button on Accura
2300[S]. In the event log mode, users can check event data and can also clear the event alarm and DO
signals.
Fig 3.3 DO Operation Setup Screen of Accura 2300[S]
Setup for Accura 2350-TEMPS Module
Setting the Accura 2350-TEMPS module with the button on Accura 2300[S] is not supported. Users can
set up Accura 2350-TEMPS module via Modbus communication. Refer to
「
Accura 2300[S]/2350
Communication User Guide
」
for details.
Event Log Mode of Accura 2300[S]
In the Event log mode of Accura 2300[S], users can check detailed data on the events that occurs in the
Accura 2350-TEMPS module. Events of the Accura 2350-TEMPS module include internal/external
temperature events and events on the temperature difference. Each event consists of start and end
events.
Fig 3.4 Start Event on Internal Temperature
Fig 3.5 End Event on Internal Temperature
Summary of Contents for ACCURA 2350-TEMPS
Page 1: ......
