background image

ASSEMBLY INSTRUCTION

This page lists all the contents included in the box.
Please take the time to identify the hardware as
well as the individual components to this product.
As you unpack and prepare for assembly, place the

contents on a carpeted or padded area to protect
them from damage.

787-15 DESK WITH POWER & USB OUTLET

1

Table Top

Back Leg

Rear Stretcher
(Long)

Allen Key

M5x60mm

Lock Washer
M8

Flat Washer
M8

Front Leg L&R

Jcbc Bolt

M8x60mm

Csk-Screw

M4x38mm

Side Stretcher
(Short)

1pc

8pcs

8pcs

1pc

1pc

6pcs

2pcs

2pcs

2pcs

8pcs

Summary of Contents for 787-15

Page 1: ...s product As you unpack and prepare for assembly place the contents on a carpeted or padded area to protect them from damage 787 15 DESK WITH POWER USB OUTLET 1 Table Top Back Leg Rear Stretcher Long Allen Key M5x60mm Lock Washer M8 Flat Washer M8 Front Leg L R Jcbc Bolt M8x60mm Csk Screw M4x38mm Side Stretcher Short 1pc 8pcs 8pcs 1pc 1pc 6pcs 2pcs 2pcs 2pcs 8pcs ...

Page 2: ...A Then insert Jcbc Bolt F Lock Washer G and Flat Washer H into holes of each corner block of Table Top A by using Allen Key I Do not fully tighten the bolts in this step Insert Rear Stretcher Long E into Back Leg C with Csk Screw J by using Screwdriver not included Attach the other Back Leg C onto Table Top A Then insert Jcbc Bolt F Lock Washer G and Flat Washer H into holes of each corner block o...

Page 3: ...ver not included Insert Side Stretcher Short D into Front Leg B with Csk Screw J by using Screwdriver not included Attach the other Front Leg B onto Table Top A Then insert Jcbc Bolt F Lock Washer G and Flat Washer H into holes of each corner block of Table Top A by using Allen Key I Do not fully tighten all screws in this step ...

Page 4: ...up on an even surface and check that it is balanced If there is a slight wobble apply downward pressure in the corner where a leg is uneven Keeping pressure in that corner tighten all bolts If balanced apply downward pressure evenly in the center and tighten all bolts Do not over tighten beyond hole depth Turn the assembled Table to the upright position carefully Make sure the Table is level and t...

Reviews: