Cleaning & Care
Treat surface with care. Surface is resistant to scratches but is not scratch resistant. Clean
surface with a dry or damp soft cloth. Do not use abrasive cleaners. Hardware may loosen over
time. Periodically check that all connections are tight.
4
Stand Table up on an even surface and check that it is balanced. If there is a slight wobble,
apply downward pressure in the corner where a leg is uneven. Keeping pressure in that
corner, tighten all bolts. If balanced, apply downward pressure evenly in the center and
tighten all bolts. Do not over-tighten beyond hole depth.
Turn the assembled Table to the upright position carefully. Make sure the Table is level,
and then securely tighten all bolts at this stage. Assembly is now completed.
