12
Double Seam Installation Manual
3.10
In cases for upper rows of any column are covered with
regular metal panel rather than Roofit.solar panel, overlap-
ping must be made by:
a.
First, cutting the locks of regular metal panel as in Roofit.solar
module as it is shown in Section ‘Cutting Edges/Locks’.
b.
Leaving a 25 mm space for folding (Fig.11).
c.
Putting double tape to the overlapping area of Roofit.solar
panel that will join regular metal panel (Fig. 12).
d.
Fastening small overlapping element by flat headed screws
(Fig. 13).
e.
Then placing folded part of regular metal panel that was
prepared under the fastened small overlapping element (Fig. 14).
Fig. 10
Fig. 11
Fig. 12
Regular metal
overlapping
Line for folding
25 mm
Please read Roofit.solar Safety Manual cerafully before initiating any Roofit.solar system installation.
