4.
Calibrate the Blind by pressing the down arrow on the handset
or switch
to fully close, then the
middle 'STOP' button, then
the
up arrow to fully open. This may need to be done several times to calibrate. The blind is now ready for normal use.
Fitting Guide (V.1) |
4 of 6
Troubleshooting
Q.
1
) When the Blind is operating it is making a scraping / juddering sound?
A: Check the Railing edges, they may require cleaning off any debris, dust or grit with a damp cloth / baby wipes.
Q.
2
) The Blind is not opening / closing straight?
A: Check the Railing edges, they may require cleaning off any debris, dust or grit with a damp cloth / baby wipes.
Q.
3
) The Blind is not fitting to Side A (Motor side)?
The Blind is being fit upside down – look at the directional sticker and fit accordingly.
Q.
4
) The Blind is not fitting to Side B (Static Side)?
This side requires
moderate force
to clip in the bracket securely. It will seem short on the length (80mm) but this is normal. Start
in the middle and work your way outwards making sure each time it clips into the bracket securely.
Q.
5
) The Screws & Support Blocks are missing from the package.
Please contact customer support to re-order.
Q.
6
) The Fabric of the Blind is damaged.
Please contact
Roofglaze customer support
.
Q.
7
) The Handset
or switch
is missing from the box.
Please contact
Roofglaze
to re-order.
