![Rontan Maximum Super Takedown Installation & Operating Instructions Manual Download Page 4](http://html.mh-extra.com/html/rontan/maximum-super-takedown/maximum-super-takedown_installation-and-operating-instructions-manual_1485287004.webp)
Maximum Super Takedown
Installation, Operation & Programming Instructions
www.rontan.com
Rev. 0.3
Page 4
Nominal Size
Dimension
A (in)
6 domes
45
7 domes
54
2. Installation
2.1. Mounting the hardware
Follow the steps below for proper hardware installation:
The Migfoot*
A. Insert the mounting bolts into the groove on the lightbar.
B. Place the Migfoot on the mounting bolts as shown and loosely tighten the nuts using
a 10mm wrench. *Used for the 45 inch lightbar.
C. Measure the distance of each corner from the vehicle roof. Use the formula below to
calculate the distance between the center of the lightbar and the inner edge of the
migfoot.
D (in) = roof [width/2]
– 13.5
Examples of distance (D):
Dodge Charger: D=12¼ inches
Ford Crown Victoria: D=12 inches
Chevy Impala: D= 12 inches