Ronstan RF6 Instruction Manual Download Page 5

Page: 5 / 6

INSTALLING BLOCK TO RF6

(Block not included)

www.ronstan.com

Invert the stand up boot.

Pass the shackle of the block through the stainless steel
loop.

Place the inverted boot over the shackle then pass
the pin through the headpost and tighten.

NOTE: THE BOOT IS

PRIMARILY DESIGNED

TO SUIT THE

RONSTAN SERIES 55

ORBIT BLOCK

™

. IF A

SMALLER BLOCK IS

USED THE BOOT CAN

BE CUT TO SIZE

Roll boot over to original position as shown above.
The two lugs in the underside of the boot will locate
into the holes in the top of the base.

Summary of Contents for RF6

Page 2: ...w ronstan com 2 Use a Phillips head driver to remove the cam cleat from the swivel arm Note keep the 8G screws Use a Phillips head to drive the camcleat screws into the pre drilled holes in the riser Place supplied M5 nut into cleat riser Use Allen key to drive cap screw washer and nut together Ensure the riser is fitted firmly to the arm Completed RF6 with cleat riser fitted ...

Page 4: ...d to suit the Ronstan shackle head Series 55 Ratchet Orbit Block If a smaller block is used the boot can be cut to suit www ronstan com 4 1 If using Ronstan Series 40 Orbit Block 1A 2A 1B 2B 1C 2C 2 If using Ronstan Dyneema link head Series 55 Orbit Block ...

Page 5: ...ce the inverted boot over the shackle then pass the pin through the headpost and tighten NOTE THE BOOT IS PRIMARILY DESIGNED TO SUIT THE RONSTAN SERIES 55 ORBIT BLOCK IF A SMALLER BLOCK IS USED THE BOOT CAN BE CUT TO SIZE Roll boot over to original position as shown above The two lugs in the underside of the boot will locate into the holes in the top of the base ...

Page 6: ...SM Prevents the arm from swinging away when the mainsheet is not held www ronstan com 6 To Disengage turn switch anti clockwise RF6 will swivel freely To Engage Turn switch clockwise RF6 will engage ball ratchet This adds friction to the rotation ...