background image

7

MInERal DEPosIts anD 

DIsColouRatIon

Due  to  the  large  surface  area  of  the 
concealed 

element 

interior 

base, 

discolouration  due  to  mineral  deposits 
from  tap  water  may  appear  more  obvious 
by  leaving  a  brown  stain  on  the  base.  
THIS IS NOT RUST.

To  remove  the  discolouration,  follow  the 
instructions “Removing mineral deposits”.

REMoVInG MInERal DEPosIts

Mineral  deposits  in  tap  water  may  cause 
the  kettle  interior  and  water  window  to 
discolour  over  time.  This  may  be  removed 
by  using  a  proprietary  kettle  descaler 
which  is  available  from  most  leading 
supermarkets,  department  stores  and  
hardware stores.

altERnatIVEly

1. 

Fill  the  kettle  until 

2

3

  full  with  1  part 

vinegar (or a few slices of lemon) and 2 
parts water, bring to the boil and allow to 
stand overnight.

2. 

Empty  the  solution  from  the  kettle. 
Fill  the  kettle  with  clean  water, 
bring  to  boil  and  discard  the  water. 
Repeat  and  the  kettle  will  be  ready  
for use.

stoRaGE

Switch the kettle off at the power outlet and 
unplug  from  the  outlet,  clean  and  dry  the 
kettle  as  per  the  CARE  AND  CLEANING 
section.  Ensure  that  the  lid  is  closed  and 
locked firmly into place. Wrap the power cord 
around  the  cord  storage  under  the  power 
base. Stand the kettle upright on the power 
base. Do not store anything on top.

CaRE anD ClEanInG

Always switch off at the power outlet, and then 
unplug the appliance from the power outlet  
before cleaning. 

ClEanInG thE fIltER

The kettle features a removable mesh filter to 
remove  scale  deposits  for  cleaner  water.  To 
clean the scale deposits from the filter, open 
the lid and remove the filter by pressing the 
filter towards the centre of the kettle to unclip.

The  filter  can  be  cleaned  by  placing  under 
warm  running  water  and  rubbing  with  a 
cleaning cloth or brush.

To  replace  filter,  simply  clip  the  filter  back  
in  position  in  the  slot  behind  the  spout  of  
the kettle.

ClEanInG thE KEttlE ExtERIoR

The  outside  stainless  steel  surface  of  the 
kettle may be wiped over with a damp cloth 
and polished with a soft, clean dry cloth.

Note:  Do  not  use  chemical,  steel  wool, 
or  abrasive  cleaners  to  clean  the  inside  or 
outside of the kettle.

 

CautIon: to PREVEnt DaMaGE 

to  thE  aPPlIanCE  Do  not  usE 

alKalInE  ClEanInG  aGEnts 

WhEn  ClEanInG;  usE  a  soft 

Cloth anD MIlD DEtERGEnts.

 

WaRnInG:  nEVER  IMMERsE 

thE KEttlE BasE, sWItCh aREa, 

PoWER BasE oR PoWER suPPly 

CoRD  In  WatER,  oR  alloW 

MoIstuRE to CoME In ContaCt 

WIth thEsE PaRts.

 

CautIon: EnsuRE thE KEttlE 

anD WatER haVE CoolED DoWn 

BEfoRE  attEMPtInG  to  ClEan 

thE fIltER.

Summary of Contents for RKE600













Reviews: