Ronson RKE600, Manual

Page: 7 / 12

6
NOTE: Do not remove the kettle from the power
base during operation. Ensure the kettle has
switched to the ‘OFF’ position after the water
has boiled before removing the kettle from the
power base.

CautIon: thIs aPPlIanCE Is
DEsIGnED foR thE BoIlInG of DRInKInG
qualIty WatER only; nEVER usE It to
hEat oR BoIl any othER lIquIDs oR
fooDstuffs. thE lID shoulD alWays
BE fIRMly In PlaCE anD loCKED ClosED
BEfoRE usE.

CautIon: Do not oPEn thE lID WhIlE
thE WatER Is BoIlInG. EnsuRE thE lID Is
ClosED WhIlst BoIlInG.
safEty BoIl DRy PRotECtIon
The kettle is fitted with a safety device which
protects against overheating should the appliance
be operated with insufficient water. If this occurs
the kettle will stop heating and automatically
switch off.
Should this occur, switch off at the power outlet
and unplug. Allow kettle to cool before refilling.
When the kettle has cooled down, the safety device
can be reset by removing and then replacing the
kettle on its base.