Ronix RH-9180, Manual

Page: 9 / 12

LASER DISTANCE METER
8
tance meter will enter continuous measurement mode.
4) Move the device back and forward to proper distance.
5) Click
to pause the measurement .
6) Click again to leave the continuously measurement mode.
MEASUREMENT REFERENCE
1) There are four reference positions for measurement.
They are back of the unit, front of the unit, tripod thread and the spike.
2) Click
to select the proper position.
.
MEASUREMENT ADDITION & SUBTRACTION
1) To make summary or difference between two measurements is easy.
2) Finish your first measurement, then click to save as Addend or
to save as Minuend.
3) Take the second measurement, then click to add from addend
or to subtract minuend.
.
AREA MEASUREMENT
1) Click to enable Area measurement.
2) Laser will be activated when entering area measurement mode.
3) Follow the instructions on main screen to measure WIDTH and
LENGTH.
4) After finish all the instructions, the result [AREA] will be showed
on screen.
.
VOLUME MEASUREMENT
1) Click twice to enable Volume measurement.
2) Laser will be activated when entering volume measurement mode.
3) Follow the instructions on main screen to measure WIDTH,
LENGTH and HEIGHT.
4) After finish all the instructions, the result [VOLUME] will be showed
on screen.
.
INDIRECTLY HEIGHT I, II & III MEASUREMENT (BASE ON