RonI, INC
8001 Tower Point Drive
Charlotte, NC 28227
U.S.A.
Toll Free (866) 543-8635
Ph.: (704) 847-2464
Fax: (704) 847-6739
Email:
Web Site: http://www.liftoflex.com
Rev July 2016
11
8.1.1 Battery Indicator and On/Off Switch
(Switch is only on 19139B, 19171B, 19258B and 19279B
Power Packs)
8.2 Handle
The handle is easily adjustable to any desired height.
8.3 Mast
IMPORTANT!
Maximum load capacity is as noted on the lift mast
The lifting device may not be used for lifting persons
Place the LIFT-O-FLEX
around the working area.
Always lock the wheels by pressing down the brake rod
before loading or off loading.
Use the remote control to lift or lower the end-effector.
Place the load on the end-effector.
The load shall always be centered and as close to the mast as possible for
stability.
8.4 Moving
Always lower the end-effector to the lowest possible position before moving.
8.5 Directional lock
If you have a heavy load and in particular if the floor is slightly at an angle then use the directional lock on the rear
casters by engaging the brake rod straight up. The rear wheels will no longer swivel.
Battery charge state indicator (Voltmeter)
On/Off Switch-Control card will automatically shut off power in the
electronic power pack after a timed period of inactivity (Power to
indicator is still on). Operator must activate the switch for
continued use. For periods of non-lifter use, power off using the
switch (Power to indicator is then off). Switch power on via the
switch for addtional use of the lifter.
The ”C” Series Power Packs the On/Off switch is eliminated,
activation of the ”UP”/”DOWN” remote controller wakes the lifter
after time out.
