Functions
The device
can be used like conventional binoculars during the day, but the colours
can be slightly distorted, which is normal. At night, the IR sensor captures the
residual light available, boosts it and displays the image on the monitor. When
looking on the monitor after switching your device via the On/Off button, you will see
various symbols on the screen.
At
①
the video mode
or photo mode
will be displayed. You can change the
recording mode by briefly pressing the
/
button. In the photo mode,
briefly press the
button to take a photo. In the video mode you can also start
video recording using the
button. Press the
again to pause the recording.
You can end the video recording via the
/
button.
In the video mode
②
shows the maximum recording time left and in the photo mode
the number of photos still possible to take. The value in each case depends on the
space available on the memory card.
The charge condition of the batteries is shown at
③
.
④
shows that a memory card has been installed. If no memory card has been
installed, “No card” will be shown at the centre of the screen.
Note
:
The recorded video will be separated in 4:59 minutes each file. The LED
indicator light is permanently shining GREEN when in work mode.
www.rongland.co.uk
