Rondo Doge RONDOPRESS FGDISA/R, Operating Manual

Page: 14 / 29

Code: B0500195
Edition: 03. 2000
Operating Manual
5. Operation
050 - 2
3
5.3 Working with the Dough-Fat pressing machine
Set the pressing time
- Set the desired pressing time using the two keys + / - (3)
The preset pressing time will be stored in the control
system during the next press cycle.
Move the piston into the lower position
- Open the lid as far as the stop and then lower it slightly
This causes the hydraulic pump to start and the piston
moves automatically to the lower position.
Insert dough or fat piece into the press chamber
- Insert the plastic-wrapped dough or fat piece in the
press chamber
Pressing the dough or fat piece
- Close the lid by means of a rapid movement and press it
down in the closed position until the motor starts and
the lid locking engages
The piston now moves upwards automatically and
presses the inserted piece into a single block for the
preset pressing time
On completion of the pressing time:
- the pressure on the piston is released
- the lid is unlocked
- the piston moves to the upper position enabling the
pressed block to be removed without difficulty