Instrument Tour
R&S
®
NRX
20
Getting Started 1424.7070.02 ─ 05
●
Switches from remote control mode (all controls disabled) to manual opera-
tion.
If you press and hold:
●
Goes to the start dialog that shows an overview of the active measurements.
Screenshot
Creates a screenshot of the current display.
[1Trig] / Delete
●
Controls the measurements depending on the trigger mode:
– For all trigger modes except "Single", starts and stops the measurement.
– For the "Single" trigger mode, enables and triggers the measurement.
Changes of the trigger state apply to all measurements.
●
Resets the auxiliary values that provide additional information about the mea-
sured values.
●
Deletes numbers or text in a field so that you can enter a new value.
Enter
●
Confirms entries in text fields, dialogs and selections in lists.
●
Shows a frame around the control in focus. You can change the focus using
the
[Freq]
Sets the carrier frequency of the applied signal. This value is used for frequency-
response correction of the measurement result.
Favorites
Reserved for future use.
Front Panel Tour
