DOMVT
Version:1.1
Creator: 5167 Validator: 5160
June 2020
X30
General Instructions
Removing the setting stem can only
be effected in Pos. I.
The use of supporting screws is
essential when mounting the hands.
Permitted hand setting strengths:
Hr / min. hands:
<40N
Second hand:
<30N
During quick date correction
(setting stem in position II), a date
switching speed of 5 d/s must not
be exceeded.
The following lube points have to be
applied to the winding stems during
casing:
T2 instructions
R150
Fitting dial and hands
• Crown in position III
• Wind hour hand forward, until date changes
• Remove working hands
• Put the friction spring on the hour wheel
• Fit dial
• Place all hands towards 12 o’clock
• Set time
• Crown in position II
• Set date
• Crown in position I
Movement holder
Setting hands
H R150.1A
Movement holder
Removing setting stem
H R150.1T
225e
