28
Cleaning and Storage
CAUTION!
• Remove the plug from the mains socket before cleaning the device.
• Never immerse the motor unit in water or other liquids!
• Do not use corrosive or abrasive cleaning agents to clean the device.
These could damage the surface.
The plastic parts (mixing container or kneading spiral) may become
discolored as a result of the addition of certain ingredients (e.g. vegetable
juices containing a lot of coloring agent). However, this is harmless and will
not have any adverse impact on the flavor of your pasta. The discolouration
of plastic parts by ingredients containing a lot of coloring agent does not
constitute grounds for a complaint.
Dismantling the Device
Dismantle the device each time before you clean it so that you can clean
all accessories with warm water. If necessary, allow stubborn remnants of
dough to soften for a little while in warm water:
1. Unscrew the locking ring.
2. Remove the pasta attachment.
3. Open the lid by pressing together the locking clip and pulling the lid up
at the same time. Remove the lid.
4. Disengage the connecting piece by turning it counter-clockwise (in the
opposite direction to the arrow marked on the mixing container).
5. Pull the face plate together with the dough screw conveyor and the
kneading spiral out of the mixing container.
6. Remove the kneading spiral from the drive shaft of the dough screw
conveyor.
7. Remove the connecting piece from the dough screw conveyor.
8. Take the mixing container off the motor unit.
Summary of Contents for Pasta Maker
Page 1: ...Pasta Maker Instructions Recipes ...
Page 27: ...Notes 27 ...