160825
ronbow.eu | ronbow.com
INSTALLATION SHEET
2
WIDE
71” Tall Side Cabinet
Model
:
E016127
Designed By:
PHOENIX DESIGN |
GERMANY
Figure 1.
Figure 2.
Figure 2.
Figure 2.
Determine the ideal location of your
new side cabinet.
Measure the distance of X and Y, then
mark in the boxes in figure 1.
Use the same distances of X and
Y and measure them to the wall in
preparation to install the
anti-tip hardware.
Drill pilot holes where the anti-tipping
hardware will be installed.
Place one end of the anti-tip hardware
on the wall and fasten to the wall.
Place the matching ends on the back
of the cabinet and fasten using the
wood screws.
Zip tie the anti-tip hardware together.
Adjust the leg levelers as needed.
See Figure 1.
Step 1:
Step 2:
Step 3:
Step 4:
Step 5:
Step 6:
Step 7:
Step 8:
INSTALLING ANTI-TIPPING HARDWARE
Y =
Y =
X =
X =
Leveler
1
2
